TZM5221 to tzm5267 www.vishay.com vishay semiconductors rev. 1.9, 04-sep-15 1 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? very sharp reverse characteristic ? very high stability ? electrical data identi cal with the devices 1n5221b to 1n5267b ? low reverse current level ? standard zener voltage tolerance 5 % with a b suffix in the ordering code (e.g.: TZM5221b), suffix c is 2 % tolerance ? aec-q101 qualified ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? voltage stabilization primary characteristics parameter value unit v z range nom. 2.4 to 75 v test current i zt 1.7 to 20 ma v z specification thermal equilibrium int. constr uction single ordering information device name ordering code taped units per reel minimum order quantity TZM5221b to tzm5267b TZM5221b to tzm5267b-series-gs18 10 000 (8 mm tape on 13" reel) 10 000/box TZM5221c to tzm5267c TZM5221c to tzm5267c-series-gs18 TZM5221b to tzm5267b TZM5221b to tzm5267b-series-gs08 2500 (8 mm tape on 7" reel) 12 500/box TZM5221c to tzm5267c TZM5221c to tzm5267c-series-gs08 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions minimelf sod-80 31 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissi pation r thja = < 300 k/w p tot 500 mw zener current i z p tot /v z ma junction to ambient air on pc board 50 mm x 50 mm x 1.6 mm r thja 500 k/w junction temperature t j 175 c storage temperature range t stg -65 to +175 c forward voltage (max.) i f = 200 ma v f 1.1 v
TZM5221 to tzm5267 www.vishay.com vishay semiconductors rev. 1.9, 04-sep-15 2 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) based on dc measurement at thermal equilibrium; case temperature maintained at 30 c 2 c electrical characteristics (t amb = 25 c, unless otherwise specified) part number zener voltage range (1) test current reverse leakage current dynamic resistance temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 tk vz f = 1 khz v ma a v ? %/k nom. typ. typ. TZM5221 2.4 20 0.25 < 100 1 < 30 < 1200 < - 0.085 tzm5222 2.5 20 0.25 < 100 1 < 30 < 1250 < - 0.085 tzm5223 2.7 20 0.25 < 75 1 < 30 < 1300 < - 0.080 tzm5224 2.8 20 0.25 < 75 1 < 30 < 1400 < - 0.080 tzm5225 3 20 0.25 < 50 1 < 29 < 1600 < - 0.075 tzm5226 3.3 20 0.25 < 25 1 < 28 < 1600 < - 0.070 tzm5227 3.6 20 0.25 < 15 1 < 24 < 1700 < - 0.065 tzm5228 3.9 20 0.25 < 10 1 < 23 < 1900 < - 0.060 tzm5229 4.3 20 0.25 < 5 1 < 22 < 2000 < 0.055 tzm5230 4.7 20 0.25 < 5 2 < 19 < 1900 < 0.030 tzm5231 5.1 20 0.25 < 5 2 < 17 < 1600 < 0.030 tzm5232 5.6 20 0.25 < 5 3 < 11 < 1600 < + 0.038 tzm5233 6 20 0.25 < 5 3.5 < 7 < 1600 < + 0.038 tzm5234 6.2 20 0.25 < 5 4 < 7 < 1000 < + 0.045 tzm5235 6.8 20 0.25 < 3 5 < 5 < 750 < + 0.050 tzm5236 7.5 20 0.25 < 3 6 < 6 < 500 < + 0.058 tzm5237 8.2 20 0.25 < 3 6.5 < 8 < 500 < + 0.062 tzm5238 8.7 20 0.25 < 3 6.5 < 8 < 600 < + 0.065 tzm5239 9.1 20 0.25 < 3 7 < 10 < 600 < + 0.068 tzm5240 10 20 0.25 < 3 8 < 17 < 600 < + 0.075 tzm5241 11 20 0.25 < 2 8.4 < 22 < 600 < + 0.076 tzm5242 12 20 0.25 < 1 9.1 < 30 < 600 < + 0.077 tzm5243 13 9.5 0.25 < 0.5 9.9 < 13 < 600 < + 0.079 tzm5244 14 9 0.25 < 0.1 10 < 15 < 600 < + 0.082 tzm5245 15 8.5 0.25 < 0.1 11 < 16 < 600 < + 0.082 tzm5246 16 7.8 0.25 < 0.1 12 < 17 < 600 < + 0.083 tzm5247 17 7.4 0.25 < 0.1 13 < 19 < 600 < + 0.084 tzm5248 18 7 0.25 < 0.1 14 < 21 < 600 < + 0.085 tzm5249 19 6.6 0.25 < 0.1 14 < 23 < 600 < + 0.086 tzm5250 20 6.2 0.25 < 0.1 15 < 25 < 600 < + 0.086 tzm5251 22 5.6 0.25 < 0.1 17 < 29 < 600 < + 0.087 tzm5252 24 5.2 0.25 < 0.1 18 < 33 < 600 < + 0.088 tzm5253 25 5 0.25 < 0.1 19 < 35 < 600 < + 0.089 tzm5254 27 4.6 0.25 < 0.1 21 < 41 < 600 < + 0.090 tzm5255 28 4.5 0.25 < 0.1 21 < 44 < 600 < + 0.091 tzm5256 30 4.2 0.25 < 0.1 23 < 49 < 600 < + 0.091 tzm5257 33 3.8 0.25 < 0.1 25 < 58 < 700 < + 0.092 tzm5258 36 3.4 0.25 < 0.1 27 < 70 < 700 < + 0.093 tzm5259 39 3.2 0.25 < 0.1 30 < 80 < 800 < + 0.094 tzm5260 43 3 0.25 < 0.1 33 < 93 < 900 < + 0.095 tzm5261 47 2.7 0.25 < 0.1 36 105 < 1000 < + 0.095 tzm5262 51 2.5 0.25 < 0.1 39 125 < 1100 < + 0.096 tzm5263 56 2.2 0.25 < 0.1 43 150 < 1300 < + 0.096 tzm5264 60 2.1 0.25 < 0.1 46 170 < 1400 < + 0.097 tzm5265 62 2 0.25 < 0.1 47 185 < 1400 < + 0.097 tzm5266 68 1.8 0.25 < 0.1 52 230 < 1600 < + 0.097 tzm5267 75 1.7 0.25 < 0.1 56 270 < 1700 < + 0.098
TZM5221 to tzm5267 www.vishay.com vishay semiconductors rev. 1.9, 04-sep-15 3 document number: 85609 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (inches): minimelf sod-80 cathode indentification 0.47 (0.019) max. 2.5 (0.098) max. 1.25 (0.49) min. 3.7 (0.146) 3.3 (0.130) 5 (0.197) ref. 2 (0.079) min. 1.6 (0.063) 1.4 (0.055) foot print re commendation: * * the gap between plug and glass can be either on cathode or anode side document no.:6.560-5005.01-4 rev. 8 - date: 07.june.2006 96 12070
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
